Schneider Motor Construction Lifts Sliding C gate With 36m / min
Rated Lifting Speed
Consists of a base to support the mast and railing. A single cage
enclosure can be transformed into a twin cage enclosure by adding
just a few parts.
The gate is interlocked mechanically and electrically. It can not
be opened unless the cage is at the landing. The cage will not
start unless the gate is closed.
Each section is 1508mm length and provided with one rack for single
cage hoist or two racks for twin cage hoist and welded
counterweight guide rail if necessary.
The sections are bolted together with screws and nuts to form mast.
The mast is tied to the building with tie-in and is the guide rail
There are several types of tie-in for selecting, Tie-in is
available in variable sizes. Distance between the tie-in is about
6~10.5m along the mast.
Consists of steel structure, firm wire mesh wall, entrance and exit
gates, Guide rollers guide the cage to travel along the mast.
Safety hook on the cage main frame prevents the cage climbing off
The cage roof with safety railing serves as working platform during
erection. One can easily get up on the roof for erection and
maintenance because of a trap door on the roof and a ladder in the
Consists of electrical motor, electric-magnetic bike, coupling,
reducing device and pinions etc. The cage climbs by means of pinion
in engagement with the rack.
The single-tooth safety device consists of shell, braking tapered
drum, centrifugal block and spring etc. When the cage is started,
the centrifugal block in the speed limiter overcomes spring tension
to drive the braking taperd drum to rotate and screw-in together
with the screw connected to it. The braking tapered drum contacts
with the shell to gradually increase friction and ensure smooth
braking of the cage. The braking principle of three-tooth safety
device is same as single-tooth safety device, with bugger braking
The lifting device is fitted on the cage roof used to lift up mast
sections, tie-ins and other parts. Rated load of the lifting device
A brake is installed on the winch of lifting device. Loose the
handle, The winch will stop. Lift up something by rotating handle
clockwise or put down something by rotating handle
Construction lift hoist, other name Construction Hoist, Construction Lifter. Used for
lifting material and passenger when construction. It is easy to
install and operate, secure and popular. Subjects to the
application site, the mast sections, cage dimension, lifting height
could special make.
|Payload||1000kg/12p||2×1000kg/12p||1500kg/18p||2×1500kg/18p||2000kg/24p||2×2000kg/24p||2000kg/24p||2×2000kg/ 24p|| |
|Erecting payload (kg)||800||2x800||900||2x900||1000||2x1000||1000||2x1000|| |
|Lifting speed (m/min)||30||30||36||36||36||36||36||36|| |
|Reduction ratio||1:18||1:18||1:16||1:16||1:16||1:16||1:16||1:16|| |
|Max.lifting height(m)||150||150||250||250||250||250||250||250|| |
|Cage internal size|
(L x W x H)(m)
|Power supply (V)||380V,50Hz or 60Hz||380V,50Hz or 60Hz||380V,50Hz or 60Hz||380V,50Hz or 60Hz||380V,50Hz or 60Hz||380V,50Hz or 60Hz||380V,50Hz or 60Hz||380V,50Hz or 60Hz|| |
|Motor power (kW)||2×11||2×2×11||2×13||2×2×13||3×11||2×2×11||2×13||2×2×13|| |
|Rated current (A)||2×24||2×2×24||2×27||2×2×27||3×24||3×2×24||2×27||2×2×27||JC=25%|
|Power capacity (KVA)||34||2×34||42||2×42||49||2×49||42||2×42|| |
- Proven helical gearbox as an option.
- Single and double cage configurations.
- Design without counterweight.
- Multiple choices of doors.
- Simple and easy operation system.
- Recessed control panel, several choices.
- PLC control as an option.
- Durable materials, high quality steel for increased strength and
weight reduction, hot dip.
- Galvanized mast section and tie-in.
- Wide range of tie-in.
- Wide range of optional equipment and functions.
- Advanced and latest Euro technology, beautiful appearance, friendly
- Serious and standard quality control and quality testing.
- 7/24hours instant and professional support.